Subaru Crosstrek Owners Manual: Basic screen items
These are the basic screens of the multi function display.
Item
Information bar
Fuel consumption screen
ECO gauge screen (if equipped)
ECO history screen
Vehicle activation status screen
EyeSight screen (models with the EyeSight system)
Triple meter screen
Guidance screen
Clock/calendar screen
By operating "
" or "
" of the control
switch, you can switch the screen that is
always displayed. Also, when the
button is pressed and held, the selection
screen can be displayed. For details about
the selection screen, refer to "Selection
screen"
Basic screens
...
Information bar
Information bar
Outside temperature indicator
Top display
Clock
While the ignition switch is in the "ACC" or
"ON" position, the outside temperature
indicator, clock, etc. will be sho ...
Other materials:
Inspection mode Operation
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Inspection ModeOPERATIONIt is possible to diagnose the DTC by performing the indicated inspection mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is r ...
Vehicle load limit - how to determine
The load capacity of your vehicle is
determined by weight, not by available
cargo space. The load limit of
your vehicle is shown on the
vehicle placard attached to the
driver's side door pillar. Locate the
statement "The combined weight of
occupants and cargo should never
exceed XXX kg or XX ...
Dtc p1160 throttle return spring
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P1160 THROTTLE RETURN SPRINGNOTE:For the diagnostic procedure, refer to DTC P2101. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P2101 THROTTLE ACTUATOR "A" CONTROL MOTOR CIRCUIT ...