Subaru Crosstrek Owners Manual: Basic information before use
WARNING
When the vehicle is stopped with the engine running, always apply the parking brake for safety. Failure to do so may result in loss of control of your vehicle and cause an accident or serious injury.
CAUTION
- To prevent damaging the screen, touch the screen keys with your finger lightly.
- Wipe off fingerprints using a glass cleaning cloth. Do not use chemical cleaners to clean the screen, as they may damage the touch screen.
- Touch screen gestures
- Touch screen operation
- Entering letters and numbers/list screen operation
- Initial screen
- Connecting and disconnecting a USB memory/portable device
Error messages
Mode
Message
Explanation
CD
"Disc read error."
This indicates that no MP3/WMA/AAC files are
included in the disc.
This indicates that the disc i ...
Touch screen gestures
Operations are performed by touching the touch screen directly with your
finger.
Operation method
Outline
Main use
TouchQuickly touch and release
once.
Changing ...
Other materials:
Preparation tool
AIRBAG SYSTEM > General DescriptionPREPARATION TOOL1. SPECIAL TOOL• TEST HARNESS NILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS98299SA000TEST HARNESS NUsed for unit inspection of steering roll connector.• TEST HARNESS QILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS98299SA040TEST HARNESS QUsed ...
Push-button ignition switch (models with "keyless access with push-button start
system")
Operating range for push-button start system
Antennas
Operating range
NOTE
In the Subaru Ascent, the push-button ignition system will function
only when the access key fob is detected within the effective operating range
of the built-in antennas inside the vehicle.
Even if t ...
Dtc c2533 control module board temperature sensor
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2533 CONTROL MODULE BOARD TEMPERATURE SENSORTROUBLE SYMPTOM:The steering wheel operation feels heavy.NOTE:When this code is displayed, replace the power steering control module with ...
