Subaru Crosstrek Service Manual: Assembly
MECHANICAL(H4DO) > Chain Cover
ASSEMBLY
1. Install the camshaft position sensor. Camshaft Position Sensor > INSTALLATION">
2. Install the oil control solenoid. Oil Control Solenoid > INSTALLATION">
3. Install the engine oil temperature sensor. Engine Oil Temperature Sensor > INSTALLATION">
4. Install the oil pressure switch. Oil Pressure Switch > INSTALLATION">
5. Install the engine oil filter and the oil pump union. Engine Oil Filter > INSTALLATION">
6. Install the oil filler cap.
Chain cover
...
Removal
MECHANICAL(H4DO) > Chain CoverREMOVALNOTE:When replacing a single part, perform the work with the engine assembly installed to body.1. When working on the vehicleNOTE:When working on the vehicle, p ...
Other materials:
Installation
SECURITY AND LOCKS > Front Inner RemoteINSTALLATION1. Before installation, check the following items.• Cable is free from deformation such as fray.• Grease is applied sufficiently to cable joints.If grease is insufficient, add it as necessary before assembling the cable.• If the ...
Dtc p0970 pressure control solenoid "c" control circuit low
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0970 PRESSURE CONTROL SOLENOID "C" CONTROL CIRCUIT LOWDTC detecting condition:Immediately at fault recognitionTrouble symptom:Drivability getting worse.CAUTION:Use the check bo ...
Parking brake stroke
Check the parking brake stroke according
to the maintenance schedule in the
"Warranty and Maintenance Booklet".
When the parking brake is properly
adjusted, braking power is fully applied
by pulling the lever up 7 to 8 notches
gently but firmly (approximately 45 lbf [200
N, 20.4 kgf]). ...