Subaru Crosstrek Service Manual: Assembly
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transfer Driven Gear
ASSEMBLY
1. Using the ST, install the taper roller bearing (transfer case side).
CAUTION:
Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).
NOTE:
Be careful when handling, because the outer race and inner race of the taper roller bearing are used as a set.
| ST 927640000 | INSTALLER |
(A) | Taper roller bearing (transfer case side) |
2. Using the ST, install the taper roller bearing (extension case side).
CAUTION:
Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).
NOTE:
Be careful when handling, because the outer race and inner race of the taper roller bearing are used as a set.
| ST1 498175500 | INSTALLER |
| ST2 899864100 | REMOVER |
(A) | Taper roller bearing (extension case side) |
Removal
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transfer Driven GearREMOVAL1. Remove the manual transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL">2. Remove the ...
Other materials:
Disassembly
FRONT SUSPENSION > Front StrutDISASSEMBLY1. Using a coil spring compressor, compress the coil spring - front.2. Using a hexagon wrench to prevent strut rod from turning, remove the self-locking nut with ST.CAUTION:When installing the coil spring compressor to the coil spring, follow the operation ...
Read diagnostic trouble code (dtc) Operation
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Read Diagnostic Trouble Code (DTC)OPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Select Sy ...
Dtc p0102 mass or volume air flow sensor "a" circuit low
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0102 MASS OR VOLUME AIR FLOW SENSOR "A" CIRCUIT LOWDTC detecting condition:Immediately at fault recognitionTrouble symptom:• Improper idling• Engine stall• Poor driving performance ...
