MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Reverse Check Sleeve
ASSEMBLY
1. Install the return spring (1st-2nd), return spring cap, reverse accent shaft, reverse check cam, return spring (5th-Reverse) and reverse check spring.
NOTE:
Be sure to insert the curved part of reverse check spring into the check cam groove.
(A) | Reverse check plate |
(B) | Reverse check spring |
(C) | Return spring (5th-Reverse) |
(D) | Reverse check cam |
(E) | Reverse accent shaft |
(F) | Return spring cap |
(G) | Return spring (1st-2nd) |
2. Hook the curved part of reverse check spring onto the reverse check plate.
3. Rotate the cam so that the protrusion on the reverse check cam is located at the plate opening.
4. While fixing the cam to that position, attach the reverse check plate to the reverse check sleeve, and secure with snap ring.
5. Insert the O-ring into the sleeve groove.
NOTE:
Use new O-rings.
Removal
COOLING(H4DO) > Water Pipe AssemblyREMOVAL1. WATER PIPE ASSEMBLY RH1. Disconnect the ground cable from battery. NOTE">2. Drain engine coolant. Engine Coolant > REPLACEMENT">3. Remove the front exhaust pipe. Front Exhaust Pipe > REMOVAL">4. Disconnect the water hos ...
Preparation tool
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF) > General DescriptionPREPARATION TOOL1. GENERAL TOOLTOOL NAMEREMARKSCircuit testerUsed for measuring resistance, voltage and current.Hexagon wrenchUsed for forcibly driving the motor assembly - sunroof. Width across flat 4 mm (0.16 in)TORX® T25Used for rem ...
Removal
AIRBAG SYSTEM > Airbag Control ModuleREMOVALCAUTION:• Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">• Do not disassemble the airbag control mo ...