Subaru Crosstrek Service Manual: Assembly
FRONT SUSPENSION > Front Arm
ASSEMBLY
1. BUSHING FRONT - FRONT ARM
1. Before assembly, inspect the following items and replace any faulty part with a new one.
• Check the front arm assembly for damage or cracks, and replace if defective.
• Visually check the bushing for abnormal cracks, fatigue or damage.
• Visually check the dust cover on the ball joint assembly for damage.
2. Align the alignment mark on the front arm assembly to the split portion of the bushing intermediate plate of the busing front - front arm.
3. Using the ST and a press, assemble the busing front - front arm.
PREPARATION TOOL:
ST: INSTALLER & REMOVER SET (927680000)
2. BUSHING REAR - FRONT ARM
1. Before installation, inspect the following items and replace any faulty part with a new one.
• Check the front arm assembly for damage or cracks, and replace if defective.
• Visually check the bushing for abnormal cracks, fatigue or damage.
• Visually check the dust cover on the ball joint assembly for damage.
2. Align a line extending from the center of recess portion with the ball joint after placing the protrusion (A) of recess portion to the ball joint side of the front arm assembly.
(a) | Recess section | (b) | Center line of recess section |
3. Using the ST and a press, install the busing rear - front arm.
CAUTION:
Align the upper face of front arm assembly and the end of bushing during installation.
(1) | Aligned |
(2) | Not aligned |
PREPARATION TOOL:
ST1: REMOVER (20299AG000)
ST2: BASE (20299AG010)
(a) | Press | (b) | Front arm ASSY | (c) | Bushing rear - front arm |
Front arm
...
Removal
FRONT SUSPENSION > Front ArmREMOVAL1. Lift up the vehicle, and then remove the front wheels.2. Remove the under cover - front. Front Under Cover > REMOVAL">3. Remove the front arm assem ...
Other materials:
Daylight saving time setting
1. Perform the preparation steps according
to "Preparation for date setting" 3-
56.
2. Operate the "
" or "
"
switch to
select the "Daylight Saving Time" item.
Then push the
button.
3. The current setting will be displayed.
Push the
button to enter the selection ...
Selecting a function menu
Press the HOME button to display home
screen.
Item
Function
AUDIO
Select to display the main
screen of the audio source that
was selected previously.
PHONE
Select to display the hands-free
function using your cell phone.
Refer to "Hands-free phon ...
Maintenance precautions
When maintenance and service are required,
it is recommended that all work be
done by an authorized SUBARU dealer.
If you perform maintenance and service
by yourself, you should familiarize yourself
with the information provided in this
section on general maintenance and
service for your SU ...
