Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Assembly

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil Pump Chain

ASSEMBLY

1. DRIVE SPROCKET

1. Using the ST, install the ball bearing.

NOTE:

Use a new ball bearing.

ST 499755502PRESS SNAP RING

2. Install the snap ring.

Oil pump chain
...

Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil Pump ChainREMOVAL1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL">2. Remove the torque co ...

Other materials:

Disassembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reduction Driven GearDISASSEMBLY1. Flatten the tab of the lock nut.2. Using the ST, counter the rotation of the reduction driven gear assembly, and remove the lock nut.ST1 18355AA000PULLEY WRENCHST2 18334AA000PIN SETST3 499987003SOCKET WRENCH ( ...

Installation
SEAT BELT SYSTEM > Front Seat BeltINSTALLATION1. SEAT BELT OUTER - FRONTCAUTION:• The parts of the driver and passenger sides are not the same. Before installation, make sure that the correct part is used.• During installation, make sure that the seat belts are not twisted.• Aft ...

System temporary stop indicator due to reduced radar sensitivity
System temporary stop indicator due to reduced radar sensitivity This indicator appears when the detectability of the radar sensors is reduced. Once the condition is corrected, the system will recover from the temporary stop condition and the indicator will disappear. If the indicator ...

© 2016-2022 Copyright www.sucross.com