Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Anniversary setting

1. Perform the preparation steps according to "Preparation for date setting" 3- 56.

Anniversary setting

2. Operate the " " or "  " switch to select the "Anniversary" item. Then push the button.

Anniversary setting

3. Select an entry in the list to set by operating the " " or " " switch. Then push the  button.

Anniversary setting

4. The selected item will be shown. Push the  button to set the selected item.

Anniversary setting

5. Select numbers by operating the " " or "  " switch. Then push the  button.

Anniversary setting

6. After entering the date by repeating step 5, you can enter the name.

Anniversary setting

7. Select characters by operating the " " or " " switch. Then push the button.

Anniversary setting

8. After entering the name by repeating step 7, select "Set" by operating the " " switch and confirm the setting by pushing the button.

Anniversary setting

9. The system will notify you that the setting is complete.

If an anniversary is approaching, the following screen will be displayed accompanied by a beep when the ignition switch has been turned to the "ON" position. This function can be set to on or off. For details, refer to "Bypass screen setting"

From 1 to 7 days prior to the anniversary
From 1 to 7 days prior to the anniversary

On an anniversary (displayed in orange)
On an anniversary (displayed in orange)

NOTE

If "_ _" is selected for either the "Month" or "Day" item instead of numbers, the anniversary notification will be deactivated.

Birthday setting
1. Perform the preparation steps according to "Preparation for date setting" 3- 56. 2. Operate the " " or " " switch to select the "Birthday" item. Then push the button. 3. S ...

Clearing birthday or anniversary
1. Perform the preparation steps according to "Preparation for date setting" 3-56 and display "Birthday" or "Anniversary" on the screen. 2. Select the preferred birthday/anniversary. 3. When ...

Other materials:

Map lights
Type A Type B To turn on the map light, push the switch. To turn it off, push the switch again. NOTE For the type A map lights, although the light switches are in the ON position, the lights are automatically turned off after approximately 30 seconds of illumination to prevent the veh ...

Replacing transmitter battery
1. Open the key head using a flat-head screwdriver. 2. Remove the transmitter case from the key head. 3. Open the transmitter case by releasing the hooks. 1) Negative (−) side facing up 4. Replace the old battery with a new battery (type CR1620 or equivalent) making su ...

Passenger s airbag on/off indicator light illumination pattern Inspection
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Passenger’s Airbag ON/OFF Indicator Light Illumination PatternINSPECTION(1)Passenger’s airbag ON indicator light(6)Light ON(10)OFF(2)Passenger’s airbag OFF indicator light(7)Empty(11)ON(3)Occupant seating(8)Child(12)Approx. 6 sec.(4)Igni ...

© 2016-2022 Copyright www.sucross.com