Subaru Crosstrek Service Manual: Airbag warning light failure

Wiring diagram

AIRBAG SYSTEM (DIAGNOSTICS) > Airbag Control Module I/O SignalWIRING DIAGRAMRefer to “Airbag System” in WI section. Airbag System > WIRING DIAGRAM"> ...

Airbag warning light remains off

AIRBAG SYSTEM (DIAGNOSTICS) > Airbag Warning Light FailureAIRBAG WARNING LIGHT REMAINS OFFNOTE:For the diagnostic procedure, refer to “AIRBAG WARNING LIGHT REMAINS ON”. Airbag Warning ...

Other materials:

Adjustment
CLUTCH SYSTEM > Clutch SwitchADJUSTMENT1. Loosen the lock nut of the clutch start switch.(A)Lock nut(B)Clutch start switch2. Disconnect the harness connector of the clutch start switch.3. Remove the snap pin and clevis pin connecting the clutch pedal and operating rod.(A)Clevis pin(B)Snap pin(C)P ...

Inspection
WIPER AND WASHER SYSTEMS > Washer Tank and MotorINSPECTION1. WASHER PUMPApply battery voltage to the connector terminal of the motor pump assembly - washer, and make sure that the motor operates.2. WASHER FLUID LEVEL SENSOR1. Check the connection status of washer fluid level sensor connector.2. D ...

Installation
COOLING(H4DO) > Water PumpINSTALLATION1. WATER PUMP PULLEY1. Using the ST, install the water pump pulley.ST1 18355AA000PULLEY WRENCHST2 18334AA030PULLEY WRENCH PIN SETTightening torque:14 N·m (1.4 kgf-m, 10.3 ft-lb)2. Install the under cover. Front Under Cover > INSTALLATION" ...