Subaru Crosstrek Owners Manual: Air inlet selection
Select the air inlet by pressing the air inlet selection button.
ON position (recirculation): Interior air is recirculated inside the vehicle. Press the air inlet selection button to the ON position for fast cooling with the air conditioner or when driving on a dusty road.
OFF position (outside air): Outside air is drawn into the passenger compartment.
Press the air inlet selection button to the OFF position when the interior has cooled to a comfortable temperature and the road is no longer dusty.
WARNING
Continued operation in the ON position may fog up the windows. Switch to the OFF position as soon as the outside conditions are no longer dusty.
NOTE
When the indicator light on the air inlet selection button is flashing at engine starting, a malfunction might be occurring in the electrical system.
Contact your SUBARU dealer for inspection.
The indicator light on the air inlet selection button may flash in the following cases. However, this does not indicate a malfunction.
- After the vehicle battery has been disconnected and reconnected.
- When the vehicle battery voltage is low.
Air conditioner control
The air conditioner operates only when
the engine is running.
Press the air conditioner button while the
fan is in operation to turn on the air
conditioner. When the air conditioner is
on, the ...
Defrosting
Type A and B
Select the "
" or "
" mode by turning the
airflow mode selection dial to defrost or
dehumidify the windshield and front door
windows.
Type C
Select the "
" m ...
Other materials:
Installation
BRAKE > Brake PipeINSTALLATIONCAUTION:• Be careful of the following items. Failure to do so may cause the airbag system malfunction.– Yellow connectors and harnesses with yellow tapes around them are the connectors and harnesses for the airbag system. When using a tester on these circuit ...
Dtc c2323 transmitter 3 function code abnormal
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2323 TRANSMITTER 3 FUNCTION CODE ABNORMALNOTE:Refer to DTC C2324 for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION COD ...
Vehicle Dynamics Control operation indicator light
The indicator light flashes during activation
of the skid suppression function and
during activation of the traction control
function.
NOTE
The light may remain illuminated for
a short period of time after the engine
has been started, especially in cold
weather. This does not indicate ...