SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF) > Glass Lid
ADJUSTMENT
1. Adjust the height of the lid assembly - sunroof and the roof panel.
2. Loosen the lid assembly - sunroof mounting bolts (A), and then adjust the height by moving the lid assembly - sunroof side.
Lid assembly - sunroof height difference L:
Lid assembly - sunroof to Roof panel: 0.7±1.0 mm (0.03±0.04 in)
(1) | Roof panel | (2) | Lid ASSY - sunroof |
Tightening torque:
4.5 N·m (0.46 kgf-m, 3.3 ft-lb)
Hill start assist warning light does not come on
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Warning Light Illumination PatternHILL START ASSIST WARNING LIGHT DOES NOT COME ONDetecting condition:Defective combination meterTrouble symptom:When the ignition switch is turned to ON (engine OFF), hill start assist warning light does not illuminat ...
Using aha application
1. When the top screen is displayed,
touch the station key.
Example of the main screen
2. Select the desired station from the list.
The selected station is displayed.
NOTE
The following operations are not
available on this system. Perform these
operations on the smartphone.
Add ...
Note
GLASS/WINDOWS/MIRRORS > Power Window SystemNOTEFor operation procedures of each component of the power window system, refer to the respective sections.• Power window control switch: Power Window Control Switch">• Front door glass: Front Door Glass">• Front regu ...