SECURITY AND LOCKS > Front Hood Lock Assembly
ADJUSTMENT
1. Loosen the bolt, and adjust the lock assembly - front hood while moving it up and down.
2. After adjustment, tighten the bolts securely.
Tightening torque:
Refer to “COMPONENT” of “General Description”. General Description > COMPONENT">
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil Pan and StrainerINSTALLATION1. Clean the mating surface of oil pan and transmission case.2. Install the O-ring to the oil strainer.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.3. Install the oil strainer.Tightening torque:9 N&middo ...
Inspection
LUBRICATION(H4DO) > Engine Oil FilterINSPECTION1. After installing the oil filter, run the engine and check for oil leakage.NOTE:The filter element and filter case are permanently jointed; therefore, interior cleaning is not necessary.2. Check the engine oil level. Engine Oil > INSPECTION&quo ...
Dtc u0101 lost communication with tcm
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0101 LOST COMMUNICATION WITH TCMDetected when CAN data from TCM does not arrive.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE"> ...