HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Compressor Oil
ADJUSTMENT
• If a component has been replaced, add an appropriate amount of compressor oil (same as the amount of remaining oil in removed component).
• When replacing the compressor assembly, the new compressor assembly will already have the specified amount of oil in it. Adjust the oil amount (so that the amount remains the same as that of the removed compressor assembly) and install the new compressor assembly.
NOTE:
Since the hygroscopicity of compressor oil is high, perform this series of works quickly.
Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Air Breather HoseREMOVAL1. FRONT DIFFERENTIAL SIDE1. Remove the clip (A) from the air intake boot.2. Loosen the clamp (B) connecting the air intake boot and air cleaner case (rear).3. Loosen the clamp (C) which connects the air intake boot and throttle ...
Dtc c0031 fr hold valve malfunction
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0031 FR HOLD VALVE MALFUNCTIONNOTE:For the diagnostic procedure, refer to “DTC C0064 NORMAL CLOSING VALVE 2 MALFUNCTION”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) ...
Adjustment
EXTERIOR BODY PANELS > Front HoodADJUSTMENTAdjust the clearance around the hood COMPL - front as follows.PartStandardAHood COMPL - front to Front grille7.5±1.0 mm (0.30±0.04 in)BHood COMPL - front to Bumper face - front6.0+2.0, −1.0 mm (0.24+0.08, −0.04 in)COffset value: Hood COMPL ...