Subaru Crosstrek Service Manual: Adjustment

Subaru Crosstrek Service Manual / Differentials / Rear differential (t-type) / Adjustment

DIFFERENTIALS > Rear Differential (T-type)

ADJUSTMENT

1. SIDE GEAR BACKLASH

Adjust the side gear backlash. Rear Differential (T-type) > ASSEMBLY">

2. HYPOID DRIVEN GEAR BACKLASH

Adjust hypoid driven gear backlash. Rear Differential (T-type) > ASSEMBLY">

3. TOOTH CONTACT BETWEEN HYPOID DRIVEN GEAR AND DRIVE PINION

Adjust the tooth contact between hypoid driven gear and drive pinion gear. Rear Differential (T-type) > ASSEMBLY">

4. TOTAL PRELOAD

Adjust the side retainer shim. Rear Differential (T-type) > ASSEMBLY">

Assembly

DIFFERENTIALS > Rear Differential (T-type)ASSEMBLYNOTE:• Assemble in the reverse order of disassembly.• Check and adjust each part during assembly.• Keep the shims and washers in ...

Other materials:

Dtc c1242 rear left abs sensor signal
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1242 REAR LEFT ABS SENSOR SIGNALDTC detecting condition:• Defective ABS wheel speed sensor signal (noise, irregular signal, etc.)• Defective harness connectorTrouble symptom:&bul ...

Dtc c1341 rl hold valve
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1341 RL HOLD VALVENOTE:For the diagnostic procedure, refer to “DTC C1362 NORMAL CLOSING VALVE 2”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C1362 NORMAL C ...

Disassembly
CLUTCH SYSTEM > Clutch PedalDISASSEMBLY1. Remove the clutch switches.2. Remove the clip, assist spring, rod and bushing.(A)Clip(B)Assist spring(C)Assist rod(D)Bushing(E)Clevis pin3. Remove the spring pin and lever.(A)Spring pin(B)Lever4. Remove the clutch pedal and pedal bushings.(A)Clutch pedal( ...