Subaru Crosstrek Service Manual: Abs warning light does not go off

Detecting condition:

• Defective combination meter

• Defective CAN communication

1.READ DTC.

Read the DTC. Read Diagnostic Trouble Code (DTC)">

Is DTC displayed?

Perform the diagnosis according to DTC. List of Diagnostic Trouble Code (DTC)">

Warning Light Illumination Pattern > ABS WARNING LIGHT DOES NOT GO OFF">Go to Step 2.

2.CHECK VDCCM.

Display the current data of VDCCM using Subaru Select Monitor.

Is the «ABS Warning Lamp» ON?

Warning Light Illumination Pattern > ABS WARNING LIGHT DOES NOT GO OFF">Go to Step 3.

Warning Light Illumination Pattern > ABS WARNING LIGHT DOES NOT GO OFF">Go to Step 4.

3.READ DTC.

Read the DTC after driving the vehicle at 40 km/h (25 MPH) or more.

Is DTC displayed?

Perform the diagnosis according to DTC. List of Diagnostic Trouble Code (DTC)">

Warning Light Illumination Pattern > ABS WARNING LIGHT DOES NOT GO OFF">Go to Step 4.

4.CHECK LAN SYSTEM.

Perform the diagnosis for LAN system. Basic Diagnostic Procedure">

Is there any fault in LAN system?

Perform the diagnosis according to DTC for LAN system. List of Diagnostic Trouble Code (DTC)">

Warning Light Illumination Pattern > ABS WARNING LIGHT DOES NOT GO OFF">Go to Step 5.

5.CHECK COMBINATION METER.

Check the combination meter. Combination Meter System > OPERATION">

Is the check result OK?

• Models without EyeSight
Replace the VDCCM only. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) > REPLACEMENT">
• Models with EyeSight
Replace the VDCCM&H/U. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)">

Replace the combination meter. Combination Meter">

Ebd warning light, abs warning, vdc off indicator light, vdc warning light and vdc indicator light do not come on

Vdc warning light and vdc indicator light do not go off

Other materials:

Inspection
MECHANICAL(H4DO) > Cam CarrierINSPECTION1. Visually check the cam carrier filter, and if clogging is found, replace with a new part.2. Check the camshaft journals for damage and wear. Replace the camshaft if faulty.3. Check the cam face condition of camshaft, and remove the minor faults by grindi ...

Cooling system Inspection
PERIODIC MAINTENANCE SERVICES > Cooling SystemINSPECTION1. RADIATORCheck that there are no engine coolant leaks from the hose connections. Refer to “CO” section for radiator inspection. Radiator > INSPECTION">2. RADIATOR CAPRefer to “CO” section for radiator ca ...

General diagnostic table Inspection
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > General Diagnostic TableINSPECTIONSymptomsFaulty partsTire pressure warning light illuminates.Tire pressure is reduced.• Improper tire pressure adjustment• Punctured tireTire pressure warning light blinks 25 times and then illuminates.Ti ...