Subaru Crosstrek Owners Manual: In-Car-Device setting screen
The Bluetooth settings can be confirmed and changed.
1. Display the "SETTINGS" screen. Refer to "Registering a Bluetooth phone for the first time" F5-65.
2. On the "SETTINGS" screen for "In- Car-Device setting", select the "Set" key.
- Display the Bluetooth device address of the in-vehicle equipment.
- Display the Bluetooth device name of the in-vehicle equipment. The default name is "SUBARU BT", which can be changed by selecting it and entering alphanumeric characters.
- Display the PIN code of the in-vehicle equipment. The default code is "1234", which can be changed by selecting it and entering numbers.
- Delete one character from the currently selected item (BT device name or the PIN code).
- Save the current BT device name and PIN code.
- Numeric input keys.
- Switch the screen to input characters.
Editing the Bluetooth device name
The device name can be set or changed.
1. Touch the "Name" key.
2. Enter a name and then select the "Set" key.
Editing the PIN-Code
The PIN-code can be set or changed.
1. Select the "PIN" Key.
2. Enter a PIN-code and then select the "Set" key.
NOTE
If the "PIN" key is already selected, the "ABC" key is cross-hatched and disabled.
BT Devices Connection screen
1. Press the HOME button.
2. Touch the "SETTINGS" key and then
touch the tab.
3. Touch the "BT Devices Connection"
key and then select the desired device to
register.
"BT Devices Connect ...
Hands-free phone system
The hands-free system enables calls to be
made and received without having to take
your hands off the steering wheel.
This system supports Bluetooth. Bluetooth
is a wireless data system that ena ...
Other materials:
Power supply circuit Wiring diagram
WIRING SYSTEM > Power Supply CircuitWIRING DIAGRAM1. WITHOUT PUSH BUTTON START• Engine room side• Passenger room sideNo.LoadMB-1VDC CMMB-2VDC CMMB-3Wiper relayMB-4Sub fan relayMB-5Mirror heater LHMirror heater RHRear defoggerA/C control panelMB-6Body integrated unitMB-7Main fan relay ...
Inspection
GLASS/WINDOWS/MIRRORS > Rear Regulator and Motor AssemblyINSPECTION1. Disconnect the connector of the motor - rear.2. Check the motor operation when battery voltage is applied between terminals of the motor - rear connector.• LH sideTerminal No.Inspection conditionsStandard4 (+) — 1 (&min ...
Throttle position sensor Specification
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Throttle Position SensorSPECIFICATIONThrottle body is a non-disassembled part, so do not remove the throttle position sensor from throttle body.Refer to “Throttle Body” for removal and installation procedure. Throttle Body > REMOVAL"> ...
