CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Cancel Code
64
Malfunction related to engine is detected.
Refer to the Engine Diagnostic Procedure for diagnostic procedure.
Basic Diagnostic Procedure > PROCEDURE">
Inspection
BRAKE > Rear Brake PadINSPECTION1. Check the pad thickness.NOTE:• Always replace the pads of both wheels and both sides as a set.• Replace pad clips if they are twisted or worn.• Replace the pad if there is oil or grease on it.• A wear indicator is installed on the pad - d ...
Dtc b2284 brake signal correlation
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2284 BRAKE SIGNAL CORRELATIONDTC detecting condition:When the brake signal transmitted via the hard wire and the brake signal transmitted from body integrated unit via CAN comm ...
Refrigerant leak check Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Refrigerant Leak CheckINSPECTION1. Attach the manifold gauge set.Preparation tool:Manifold gauge set(1) Check that all valves are fully closed.(2) Install the low/high pressure hoses to the service ports on the low/high pressure sides of the vehicle resp ...