Subaru Crosstrek Service Manual: Wiring diagram

Subaru Crosstrek Service Manual / Hvac system (auto a/c) (diagnostics) / Auto a/c control module i/o signal / Wiring diagram

HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Auto A/C Control Module I/O Signal

WIRING DIAGRAM

1. AIR CONDITIONER AUTO A/C MODEL

Refer to “Air Conditioning System” in the wiring diagram. Air Conditioning System > WIRING DIAGRAM">

Electrical specification

HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Auto A/C Control Module I/O SignalELECTRICAL SPECIFICATIONTerminal No.ContentMeasuring conditionStandard1Mode door actuator #4Digital signal; can not be measu ...

Diagnostic procedure with diagnostic trouble code (dtc)

...

Other materials:

Installation
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Reverse Check SleeveINSTALLATION1. Install the reverse check sleeve.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)2. Install the reverse check ball, reverse accent spring, gasket and plug.NOTE:Use a new gasket.Tightening torque:9.75 N·m ...

Removal
LIGHTING SYSTEM > Tail/Stop Light BulbREMOVAL1. CROSSTREK MODEL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - rear combination.CAUTION:Be careful not to damage the clips.(1) Release the bolts and clips, then pull out the light assembly - rear combinatio ...

Voice command system operation
1. Press the talk switch on the steering wheel. After the voice command top screen has been displayed, speech guidance will commence. NOTE When the voice command mode is audio mode, voice guidance for the voice command system can be skipped by pressing the talk switch on the steering ...