Subaru Crosstrek Service Manual: Subaru select monitor

Operation

AIRBAG SYSTEM (DIAGNOSTICS) > Read Current DataOPERATIONCheck the operating condition of each sensor in the event of malfunction in the seat belt buckle switch, or when the seat belt buckle switch ...

Inspection

AIRBAG SYSTEM (DIAGNOSTICS) > Subaru Select MonitorINSPECTION1. COMMUNICATION FOR INITIALIZING IMPOSSIBLEDTC detecting condition:Defective harness connectorTrouble symptom:Communication is impossib ...

Other materials:

Dtc b1693 door sensor rh initialization incomplete
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1693 DOOR SENSOR RH INITIALIZATION INCOMPLETEDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Open or short circuit in harness of side sensor bus (RH)• Front door impact sensor (RH ...

Tilting moonroof
Raise Lower The tilting function is activated only when the moonroof is fully closed. To raise: Press the rear side of the "UP/DOWN" switch momentarily. The moonroof raises completely. To lower: Press and hold the front side of the "UP/ DOWN" switch until the preferred positi ...

Assembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transmission CaseASSEMBLY1. Face the O-ring side of the CVTF filter to the transmission case side, and install the CVTF filter.NOTE:Apply CVTF to the O-ring of CVTF filter.2. Install the CVTF filter cover and gasket.NOTE:Use a new gasket.Tightening torq ...