Subaru Crosstrek Service Manual: Side turn signal light assembly
Installation
LIGHTING SYSTEM > Room LightINSTALLATIONInstall each part in the reverse order of removal. ...
Inspection
LIGHTING SYSTEM > Side Turn Signal Light AssemblyINSPECTION1. Install the light to check if it blinks normally.2. If it fails to blink normally, replace the light assembly - side turn mirror with a ...
Other materials:
Component
BRAKE > General DescriptionCOMPONENT1. FRONT DISC BRAKE(A)Shim-separate brake pad type(B)Shim-integrated brake pad type (1)Caliper body(11)Pad clip - upper(19)Cap - bleeder(2)Bleeder - screw(12)Pad clip - lower (3)Guide pin - front brake (black)(13)Shim - disc brake front*1:17 mm (width a ...
Trailer Hitches
WARNING
Never drill the frame or under-body
of your vehicle to install a commercial
trailer hitch. If you do, dangerous
exhaust gas, water or mud may
enter the passenger compartment
through the drilled hole. Exhaust
gas contains carbon monoxide, a
colorless and odorless gas which is
dangero ...
Inspection
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Pump RelayINSPECTION1. Check that the fuel pump relay has no deformation, cracks or other damages.2. Measure the resistance between fuel pump relay terminals.Terminal No.Standard1 and 21 M? or more3 and 493.8 — 136.4 ? (when 20°C (68� ...
