Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Push-button ignition switch (models with push-button start system)

Subaru Crosstrek Owners Manual / Instruments and controls / Push-button ignition switch (models with push-button start system)

Safety precautions

Refer to "Safety precautions"2-10.

Ignition switch light (if equipped)
For easy access to the ignition switch in the dark, the ignition switch light illuminates when the driver's door is opened or when the driver's door is unlocked using the remote keyless entry tran ...

Operating range for push-button start system
Antenna Operating range NOTE If the access key is not detected within the operating range of the antennas inside the vehicle, the pushbutton ignition switch and the engine start canno ...

Other materials:

Disassembly
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Main Shaft AssemblyDISASSEMBLY1. Put vinyl tape around main shaft spline to protect the oil seal from damage. Then pull out the oil seal and needle bearing by hand.2. Remove the lock nut and lock washer.NOTE:Flatten the lock nut tab before removing the ...

Active test Operation
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Active TestOPERATIONCAUTION:• Be sure to perform the active test while the engine is not running.• After executing the active test, execute the Clear Memory Mode.1. On «Start» display, select «Diagnosis».2. On «Vehicle selection ...

Dtc b1615 front sub sensor lh failure
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1615 FRONT SUB SENSOR LH FAILUREDIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Front sub sensor (LH) is faulty.If DTC B1615 is displayed, the circuit within the front sub sensor (LH) is faulty ...

© 2016-2020 Copyright www.sucross.com