Subaru Crosstrek Service Manual: Outer mirror assembly Note
Blind Spot Detection/Rear Cross Traffic Alert > Outer Mirror Assembly
NOTE
For the operation procedures for the outer mirror assembly, refer to “GLASS/WINDOWS/MIRRORS” section. Outer Mirror Assembly">
Diagnostics with phenomenon Inspection
Blind Spot Detection/Rear Cross Traffic Alert > Diagnostics with PhenomenonINSPECTIONRefer to “Diagnostics with Phenomenon” of “Blind Spot Detection/Rear Cross Traffic Alert (DIAG ...
Other materials:
To decrease the speed (by brake pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the "RES/SET"
switch to the "SET" side once. Now the
desired speed is set and the vehicle will
keep running at that speed without depressing
the accelerator pedal.
Cr ...
Active test Operation
ENGINE (DIAGNOSTICS)(H4DO) > Active TestOPERATIONCAUTION:After executing the system operation check mode, execute the Clear Memory Mode. Clear Memory Mode > OPERATION">NOTE:• *: After replacing ECM, be sure to perform this procedure.• For detailed operation procedures, ref ...
Inspection
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Subaru Select MonitorINSPECTION1. COMMUNICATION FOR INITIALIZING THE AIRBAG SYSTEM IS IMPOSSIBLEDETECTING CONDITION:Defective harness connectorTROUBLE SYMPTOM:Communication is impossible between the airbag control module and the Subaru Select Monitor.NOTE ...