Subaru Crosstrek Owners Manual: Models without "keyless access with push-button start system"
Remote engine starter transceiver (fob)
- Fob button
Automatic engine shutdown
The remote engine start system will
automatically shut down or will not start
the engine under the following conditions.
The total run-time has exceeded 20
minutes.
Any door or the rear gate ...
Starting the engine
NOTE
All vehicle doors (including rear gate)
and the engine hood must be closed
prior to activating the remote engine
start system. Any open entry point will
prevent starting or cause the engine ...
Other materials:
Component
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > General DescriptionCOMPONENT1. HEATER AND COOLING UNIT• Manual A/C model(1)Pipe - inlet(11)Shutter - defroster(21)Packing - evaporator core(2)Pipe - outlet(12)Shutter - vent(22)Pipe - evaporator core(3)Clamp - pipe(13)Shutter - air mix RH(23)Case - ...
Dtc c1541 clutch switch off malfunction
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1541 CLUTCH SWITCH OFF MALFUNCTIONNOTE:For the diagnostic procedure, refer to “DTC C1542 CLUTCH SWITCH ON MALFUNCTION”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) & ...
Disassembly
POWER ASSISTED SYSTEM (POWER STEERING) > Steering WheelDISASSEMBLY1. CROSSTREK MODEL1. Remove the screw, disconnect the connector and remove the paddle shift switch. (Model with paddle shift)2. Release the claws and remove the screws, then detach the cover - spoke.3. Remove connector and screw, a ...