Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Lubrication(h4do)

Subaru Crosstrek Service Manual / Lubrication(h4do)

Installation
LIGHTING SYSTEM > Turn Signal Light & Hazard Light UnitINSTALLATIONCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in & ...

Engine oil
...

Other materials:

Disassembly
STARTING/CHARGING SYSTEMS(H4DO) > StarterDISASSEMBLYCAUTION:The starter should be placed through a no-load test whenever it has been overhauled.1. Disconnect the cable from the magnet switch assembly.2. Remove the magnet switch assembly from the starter housing assembly.3. Remove screws (A) of th ...

Disassembly
CLUTCH SYSTEM > Master CylinderDISASSEMBLY1. Remove the straight pin and nipple.(A)Nipple(B)Straight pin2. Remove the oil seal.(A)Oil seal3. Move the seat towards the rear.(A)Seat(B)Master cylinder4. Remove the piston stop ring.CAUTION:When removing the piston stop ring, be careful to prevent the ...

Inspection
COOLING(H4DO) > RadiatorINSPECTION1. Check that the radiator does not have deformation, cracks or damage.2. Check that the hose has no cracks, damage or loose part.3. Remove the radiator cap, fill the radiator with engine coolant, and then install the radiator cap tester to the filler neck of rad ...

© 2016-2018 Copyright www.sucross.com