GLASS/WINDOWS/MIRRORS > Outer Mirror Assembly
INSTALLATION
CAUTION:
Be careful not to catch the harness in between the parts.
Install each part in the reverse order of removal.
Tightening torque:
Outer mirror assembly: 7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
Preparation tool
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subar ...
Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Mode Door ActuatorINSPECTION1. CHECK LINK1. Visually check the operation range of the link, and remove the foreign material if any.2. Operate the air flow control dial or switch to check that the link operates normally.3. If it does not operate normally ...
Removal
LIGHTING SYSTEM > SRF OFF SwitchREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the cover assembly - instrument panel LWR driver OUT. Instrument Panel Lower Cover > REMOVAL">3. Release the claws, and then remove the cover.4. Release the claws and remove th ...