CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > CVTF Cooler (With Warmer Function)
INSPECTION
Replace any faulty CVTF cooler hoses, CVTF cooler pipes and clamps found in the inspection below.
1. Check that there are no CVTF or engine coolant leaks from the connections.
2. Check the clamp for deformation.
3. Lightly bend the CVTF cooler hose and check for cracks in the surface or other damages.
4. Pinch the CVTF cooler hose with your fingers and check for poor elasticity. Also check for poor elasticity in the parts where the clamp was installed by pressing with your fingernail.
5. Check for peeling, cracks, and deformation at the tip of the hose.
6. Check the CVTF cooler (with warmer feature) for any damage.
Receiving a call
Incoming calls
When a call is received, the incoming call
screen is displayed with a sound.
When you receive a phone call while the
cell phone is connected, the screen
changes to the incoming call screen.
Incoming call screen
Open the "Options" screen. Refer to
"Phone volume settin ...
BT Devices Connection screen
1. Press the HOME button.
2. Touch the "SETTINGS" key and then
touch the tab.
3. Touch the "BT Devices Connection"
key and then select the desired device to
register.
"BT Devices Connection" screen (One device is registered.)
Register the device. Refer to "Registering/
connecting ...
Preparation tool
SECURITY AND LOCKS > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subaru Select Monitor 4, refer to &ldqu ...