Subaru Crosstrek Service Manual: Installation
COOLING(H4DO) > Radiator Main Fan and Fan Motor
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Confirm that the radiator hose is securely connected.
NOTE:
If the installation of the radiator main fan and fan motor is difficult, attempt installation after loosening the bolts which hold the radiator sub fan shroud to the radiator.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
Inspection
COOLING(H4DO) > Radiator Main Fan and Fan MotorINSPECTIONCheck that the radiator main fan, radiator main fan shroud and main fan motor assembly do not have deformation, cracks or damage. ...
Other materials:
Assembly
STARTING/CHARGING SYSTEMS(H4DO) > GeneratorASSEMBLYAssemble in the reverse order of disassembly.NOTE:• Refer to component for tightening torque of each part. General Description > COMPONENT">• After assembling, manually turn the pulley to check that the rotor rotates smoot ...
Installation
MECHANICAL(H4DO) > Engine AssemblyINSTALLATION1. Install the engine mounting onto the engine.Tightening torque:35 N·m (3.6 kgf-m, 25.8 ft-lb)2. Apply a small amount of grease to splines of main shaft. (MT model)Grease:NICHIMOLY N-130 or equivalent3. Position the engine in engine compartmen ...
Rear window wiper blade assembly
1. Raise the wiper arm off the rear
window.
2. Turn the wiper blade assembly counterclockwise.
3. Pull the wiper blade assembly toward
you to remove it from the wiper arm.
4. Install the wiper blade assembly to the
wiper arm. Make sure that it locks in place.
5. Hold the wiper arm ...
