Subaru Crosstrek Service Manual: Inspection

Replace any faulty CVTF cooler hoses, CVTF cooler pipes and clamps found in the inspection below.

1. Check that there are no CVTF or engine coolant leaks from the connections.

2. Check the clamp for deformation.

3. Lightly bend the CVTF cooler hose and check for cracks in the surface or other damages.

4. Pinch the CVTF cooler hose with your fingers and check for poor elasticity. Also check for poor elasticity in the parts where the clamp was installed by pressing with your fingernail.

5. Check for peeling, cracks, and deformation at the tip of the hose.

6. Check the CVTF cooler (with warmer feature) for any damage.

Disassembly

Installation

Other materials:

Dtc c0031 fr hold valve malfunction
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0031 FR HOLD VALVE MALFUNCTIONNOTE:For the diagnostic procedure, refer to “DTC C0064 NORMAL CLOSING VALVE 2 MALFUNCTION”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) ...

Dtc p1495 coil 2 egr "a" control circuit high
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P1495 COIL 2 EGR "A" CONTROL CIRCUIT HIGHNOTE:For the diagnostic procedure, refer to DTC P1499. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P1499 COIL 4 EGR "A" CONTRO ...

Installation
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Tank ProtectorINSTALLATIONInstall in the reverse order of removal.NOTE:Use a new self-locking nut.Tightening torque:T1: 9 N·m (0.9 kgf-m, 6.6 ft-lb) T2: 18 N·m (1.8 kgf-m, 13.3 ft-lb)(A)Self-locking nut ...