The Bluetooth settings can be confirmed and changed.
1. Display the "SETTINGS" screen. Refer to "Registering a Bluetooth phone for the first time" F5-65.
2. On the "SETTINGS" screen for "In- Car-Device setting", select the "Set" key.
Editing the Bluetooth device name
The device name can be set or changed.
1. Touch the "Name" key.
2. Enter a name and then select the "Set" key.
Editing the PIN-Code
The PIN-code can be set or changed.
1. Select the "PIN" Key.
2. Enter a PIN-code and then select the "Set" key.
NOTE
If the "PIN" key is already selected, the "ABC" key is cross-hatched and disabled.
Preparation
1. Turn off the ignition switch.
2. Close all doors (including rear gate).
3. Press and hold the " "
button on the
access key. All doors (including rear gate)
will then be locked.
4. Keep the " " button
pressed, and
press the rear lock button within 5
seconds after step ...
Inspection
BODY CONTROL SYSTEM (DIAGNOSTICS) > General DescriptionINSPECTIONBefore performing diagnosis, check the following items which might affect body control system problems.1. Check the battery. Battery">2. Check the fuse condition.Make sure that ampere of the fuse is setting value, and it is ...
Tilt/telescopic steering wheel
WARNING
Do not adjust the steering wheel
tilt/telescopic position while driving.
This may cause loss of
vehicle control and result in
personal injury.
If the lever cannot be raised to
the fixed position, adjust the
steering wheel again. It is dangerous
to drive without locking
...