Subaru Crosstrek Owners Manual: How to change the source
The USB Audio playback screen can be reached by the following methods:
- Connect a USB memory. Refer to "Connecting and disconnecting a USB memory/portable device"
- Select the "USB/iPod" key on the source select screen. Refer to "Selecting an audio source"
Select play mode
The play mode settings display will appear when play mode key is touched. Select the preferred play mode from the following items.
| Icon | Function |
 |
Touch to start 1 track repeat. |
 |
Touch to start repeat all. |
 |
Touch to start folder repeat. |
 |
Touch to start shuffle all. |
 |
Touch to start shuffle folder. |
 |
Return to the control screen. |
Control screen and audio panel
Select to display the audio source
selection screen.
Select to display the play mode
currently selected. Refer to "Select
play mode"
Select to display folder list.
Shows progress.
...
iPod
Audio files on the iPod can be played.
WARNING
Do not operate the player's controls
or connect the iPod while driving.
Doing so may result in loss of
control of your vehicle and cause
an accid ...
Other materials:
Removal
EXTERIOR BODY PANELS > Front Sealing CoverREMOVAL1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. NOTE">2. Remove the trim panel - front door. Door Trim > REMOVAL">3. Remove the sealing cover - front door.CAUTION:• Caref ...
Drive cycle Procedure
ENGINE (DIAGNOSTICS)(H4DO) > Drive CyclePROCEDUREIt is necessary to perform the drive cycle listed below if DTC is not found in the Inspection Mode. It is possible to complete diagnosis of the DTC by performing the indicated drive cycle. After the repair for the DTC, perform a necessary drive cyc ...
Remote engine start system Wiring diagram
WIRING SYSTEM > Remote Engine Start SystemWIRING DIAGRAM ...
