Subaru Crosstrek Service Manual: Evaporator sensor

Installation

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > EvaporatorINSTALLATIONCAUTION:• If the evaporator assembly - cooling has been replaced, add an appropriate amount of compressor oil. Compressor Oil ...

Inspection

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Evaporator SensorINSPECTION1. MANUAL A/C MODELWIRING DIAGRAM:1. Prepare the vehicle.NOTE:Check that the ambient temperature is 25 — 40°C (77 ...

Other materials:

Shift lock release
If the select lever cannot be operated, turn the ignition switch back to the "ON" position then move the select lever to the "P" position with the select lever button pressed and brake pedal depressed. If the select lever does not move after performing the above procedure, perform the follo ...

Type D
Temperature control dial (Refer to "Automatic climate control operation (type B, C and D)" F4-7 and/or "Temperature control Defroster button (Refer to "Airflow mode selection" Rear window defogger button (Refer to "Defogger and deicer" DUAL mode button (Refer to ""DUAL" mode ( ...

Canceling the function for meter/gauge needle movement upon turning on the ignition switch
It is possible to activate or deactivate the movement of the meter needles and gauge needles that takes place when the ignition switch is turned to the "ON" position. Type A combination meter To change the setting, perform the following procedure. 1. Turn the ignition switch to the "LOCK"/ ...