Subaru Crosstrek Owners Manual: Cooling system

Synthetic oil

You should use synthetic engine oil that meets the same requirements given for conventional engine oil. When using synthetic oil, you must use oil of the same classification, viscosity and grade s ...

Safety precautions

WARNING Never attempt to remove the radiator cap until the engine has been shut off and has cooled down completely. Since the coolant is under pressure, you may suffer serious burns from a spray ...

Other materials:

Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Hose and PipeREMOVAL1. LOW-PRESSURE HOSE1. Using the refrigerant recovery system, discharge refrigerant. Refrigerant Recovery Procedure > PROCEDURE">2. Remove the air intake boot. Air Intake Boot > REMOVAL">CAUTION:Move aside the ...

Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Engine Coolant Temperature SensorREMOVAL1. Disconnect the ground cable from battery.2. Drain engine coolant. Engine Coolant > REPLACEMENT">3. Disconnect the connector (A) from the engine coolant temperature sensor, and remove the engine coolant te ...

Replacement
DIFFERENTIALS > Rear Differential Side Oil SealREPLACEMENT1. Remove the rear differential. Rear Differential (T-type) > REMOVAL"> Rear Differential (VA-type) > REMOVAL">2. Remove the rear differential side oil seal using a ST or screwdriver wrapped with vinyl tape to preve ...