Subaru Crosstrek Service Manual: Component
SEATS > General Description
COMPONENT
1. FRONT SEAT
• Manual seat LH
(1) | Pad ASSY - front seat backrest | (15) | Cover - hinge front seat OUT | (29) | Pad ASSY - front seat cushion |
(2) | Cover COMPL - front backrest | (16) | Lever - reclining | (30) | Heater unit - front seat backrest |
(3) | Cover - silencer front seat backrest | (17) | Cap - lifter lever | (31) | Wire set - front seat cushion |
(4) | Wire set - front seat backrest | (18) | Knob - lifter | (32) | Heater unit - front seat cushion |
(5) | Frame ASSY - front backrest | (19) | Cover - bolt rear OUT | (33) | Cover - front cushion |
(6) | Headrest ASSY - front | (20) | Cover - slide rail OUT | ||
(7) | Bushing - free headrest | (21) | Cover - slide rail OUT | Tightening torque: N·m (kgf-m, ft-lb) | |
(8) | Bushing - lock headrest | (22) | Slide rail ASSY - OUT | T1: | 6 (0.61, 4.4) |
(9) | Hook - backrest front | (23) | Lever - towel bar | T2: | 15 (1.53, 11.1) |
(10) | Side airbag module LH | (24) | Slide rail ASSY - INN | T3: | 38 (3.87, 28.0) |
(11) | Cover - inner front | (25) | Cover - bolt rear INN | T4: | 52 (5.3, 38.4) |
(12) | Cover - frame front cushion | (26) | Seat belt inner - front | T5: | 53 (5.4, 39.1) |
(13) | Frame ASSY - front cushion | (27) | Panel - front seat | ||
(14) | Cover - hinge base front seat | (28) | Cover - hinge front seat INN | ||
• Manual seat RH
(1) | Frame ASSY - front backrest | (15) | Slide rail ASSY - INN | (29) | Cover - hinge base front seat |
(2) | Cover - silencer front seat backrest | (16) | Lever - towel bar | (30) | Cover - inner front |
(3) | Cover COMPL - front backrest | (17) | Slide rail ASSY - OUT | (31) | Side airbag module RH |
(4) | Pad ASSY - front seat backrest | (18) | Cover - slide rail OUT | (32) | Hook - backrest front |
(5) | Wire set - front seat backrest | (19) | Cover - bolt rear OUT | (33) | Bushing - free headrest |
(6) | Wire set - front seat cushion | (20) | Cover - slide rail OUT | (34) | Bushing - lock headrest |
(7) | Heater unit - front seat backrest | (21) | Cover - slide rail INN | (35) | Headrest ASSY - front |
(8) | Pad ASSY - front seat cushion | (22) | Cover - bolt rear INN | ||
(9) | Cover - front cushion | (23) | Harness - occupant detection sensor | Tightening torque: N·m (kgf-m, ft-lb) | |
(10) | Heater unit - front cushion | (24) | Control unit - occupant detection sensor | T1: | 6 (0.61, 4.4) |
(11) | Occupant detection sensor | (25) | Cover - frame front seat cushion | T2: | 15 (1.53, 11.1) |
(12) | Cover - hinge front seat INN | (26) | Frame ASSY - front seat cushion | T3: | 38 (3.87, 28.0) |
(13) | Panel - front seat | (27) | Lever - reclining | T4: | 52 (5.3, 38.4) |
(14) | Seat belt inner - front | (28) | Cover - hinge front seat OUT | T5: | 53 (5.4, 39.1) |
2. REAR SEAT
(1) | Striker - backrest rear RH | (13) | Frame ASSY - rear backrest LH | (25) | Cover - rear cushion |
(2) | Bushing - headrest | (14) | Hinge ASSY - backrest center | (26) | Wire set - rear cushion |
(3) | Bushing - lock ASSY | (15) | Pad ASSY - rear seat backrest LH | (27) | Hook - seat cushion rear |
(4) | Headrest ASSY - rear backrest | (16) | Cover COMPL - rear backrest LH | (28) | Pad and frame ASSY - rear cushion |
(5) | Headrest ASSY - rear center | (17) | Cover - armrest | ||
(6) | Belt guide - rear seat | (18) | Bushing - rear armrest | Tightening torque: N·m (kgf-m, ft-lb) | |
(7) | Knob - backrest rear | (19) | Armrest ASSY - rear center | T1: | 14.7 (1.5, 10.8) |
(8) | Knob - guide | (20) | Frame ASSY - rear backrest RH | T2: | 22.5 (2.3, 16.6) |
(9) | Tether anchor cover | (21) | Pad ASSY - rear seat backrest RH | T3: | 24.5 (2.5, 18.1) |
(10) | Lock ASSY - backrest rear LH | (22) | Cover COMPL - rear backrest RH | T4: | 28.9 (2.9, 21.3) |
(11) | Bushing - backrest hinge | (23) | Wire set - rear backrest | T5: | 33 (3.4, 24.3) |
(12) | Hinge ASSY - rear backrest | (24) | Lock ASSY - backrest rear RH | ||
Preparation tool
SEATS > General DescriptionPREPARATION TOOL1. GENERAL TOOLTOOL NAMEREMARKSLong nose pliersUsed for removing the hog ring.Hog ring pliersUsed for installing the hog ring.Circuit testerUsed for measu ...
Rear seat
...
Other materials:
Inspection
SECURITY AND LOCKS > Rear Door Latch and Door Lock Actuator AssemblyINSPECTION1. LATCHCheck if the latch operates normally.If the cable is faulty, replace the latch & actuator assembly - rear.2. ACTUATOR1. Check door lock operationCheck the door lock operation when battery voltage is applied ...
Inspection
ENTERTAINMENT > Data Communication ModuleINSPECTION1. BACKUP BATTERY1. Measure the voltage between connector terminals.Preparation tool:Circuit testerTerminal No.Standard1 (+) — 2 (−)2 V or more2. Replace the backup battery if the inspection result is not within the standard value. ...
Assembly
CONTROL SYSTEMS > MT Gear Shift LeverASSEMBLYNOTE:• Clean all the parts before assembly.• Apply NIGTIGHT LYW No. 2 grease or equivalent to each part. General Description > COMPONENT">1. Mount the bushing and cushion rubber to the stay.(A)Bushing(B)Stay(C)Cushion rubber2. I ...
