Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: By contacts list

On the phone (menu) screen, select the "Contacts" key to open the phone number list screen.

You can make a call by selecting an item in the list (up to five phone numbers are listed).

If there is no contact data, a message is displayed to indicate that there is no contact data.

Contacts screen
Contacts screen

  1. Open the "Incoming Calls" screen.
  2. Open the "Outgoing Calls" screen.
  3. Open a pop-up screen for starting the download of contact data. Refer to "Update contacts from phone"
  4. Delete all contact data. The "Delete All" key is disabled when there is no contact data. Refer to "Deleting the contact data"
  5. Open a list of contacts that starts with the selected character. This key is cross-hatched and cannot be selected if there is no contact data that starts with the selected character.

Select the up/down arrow key to scroll the list of contacts.

When you select a phone number on the screen, the outgoing call screen opens.

NOTE

Up to 1000 items in the contact data are listed. Scroll the screen to see items that are not on the screen.

When the contact is empty

For PBAP incompatible but OPP compatible Bluetooth phones

On the "Contacts" screen, select the "Download Contacts" key. A screen where you can select how to download contacts opens.

You can select to download all items or download one item. For details, refer to "Update contacts from phone"

Delete contacts

When the "Delete All" key is selected, all contact data downloaded into the invehicle equipment will be deleted.

Refer to "Deleting the contact data"

By outgoing calls
On the phone (menu) screen, select the "Outgoing Calls" key to open the "Outgoing Calls" screen. You can make a call by selecting an item in the outgoing call history list. If there is no outgo ...

By Dialpad
Input the phone number manually using the keypad displayed on the screen. Phone (Dialpad) screen Allow you to enter numbers from 0 to 9 and *, #, and +. To enter "+", press and hold the ...

Other materials:

Dtc p1451 evap system clog detected (pipe)
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P1451 EVAP SYSTEM CLOG DETECTED (PIPE)DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear M ...

Installation
SECURITY AND LOCKS > Rear Outer HandleINSTALLATION1. Before installation, check the following items.• Lever is free from deformation.• Grease is applied sufficiently to lever joints.If grease is insufficient, add it as necessary before assembling.• If the lever is faulty, replac ...

Reset to factory default settings
1. Perform the preparation steps according to "Preparation for initialization" 2. Operate the " " or "  " switch to select the "Reset to Defaults" item. Then push the  button. 3. The system will prompt a Yes/No dialogue ("No" is selected first). To return to the factory d ...

© 2016-2019 Copyright www.sucross.com