Subaru Crosstrek Service Manual: Assembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > CVTF Cooler (With Warmer Function)
ASSEMBLY
1. Attach the bracket.
Tightening torque:
23 N·m (2.3 kgf-m, 17.0 ft-lb)
Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > CVTF Cooler (With Warmer Function)REMOVALCAUTION:If the CVTF and engine coolant is spilt over exhaust pipe, wipe it off with cloth to avoid emitting smok ...
Other materials:
Installation
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > EvaporatorINSTALLATIONCAUTION:• If the evaporator assembly - cooling has been replaced, add an appropriate amount of compressor oil. Compressor Oil > ADJUSTMENT">• When the evaporator assembly - cooling has been replaced, replace ...
Sensors
Interior air temperature sensor
Solar sensor
The automatic climate control system
employs several sensors. These sensors
are delicate. If they are not treated
properly and become damaged, the system
may not be able to control the interior
temperature correctly. To avoid damaging
th ...
Installation
EXTERIOR BODY PANELS > Front DoorINSTALLATION1. FRONT DOOR PANEL1. Put a wooden block on a jack and place the panel assembly - front door on it.2. Apply grease to the sliding area of door hinges, and install the door hinge to vehicle.3. Adjust the height by the jack, and temporarily install the p ...