Subaru Crosstrek Service Manual: Airbag system
- Airbag control module
- Curtain airbag module
- Curtain airbag sensor
- Driver s airbag module
- Front door impact sensor
- Front sub sensor
- General description
- Knee airbag module
- Passenger s airbag module
- Roll connector
- Satellite safing sensor
- Side airbag module
- Side airbag sensor
- Airbag connector Procedure
- Airbag module disposal (deployment processing on vehicle) Procedure
- Inspection locations after a collision Inspection
Read diagnostic trouble code (dtc) Operation
AIRBAG SYSTEM (DIAGNOSTICS) > Read Diagnostic Trouble Code (DTC)OPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and ...
Other materials:
Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Ambient SensorINSPECTION1. Visually check the ambient sensor for dirt or damage, and clean or replace as necessary.2. Check the resistance between ambient sensor terminals.CAUTION:During inspection, be careful not to touch the sensor end in order to avoi ...
Inspection
LUBRICATION(H4DO) > Engine OilINSPECTIONCAUTION:If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emitting smoke or causing a fire.1. Park the vehicle on a level surface.2. Turn the ignition switch to OFF.3. Remove the oil level gauge and wipe away t ...
Locking the doors
Press the lock/arm button to lock all doors
and rear gate. An electronic chirp will
sound once and the hazard warning
flashers will flash once.
If any of the doors (or the rear gate) is not
fully closed, the following will occur to alert
you that the doors (or the rear gate) are
not properl ...